|
|
|
| ，
Continuous Production Line of Steel-Sided PU Sandwich Panels
|
This production line is to manufacture polyurethane-or phenol-laminated sandwich panel with color-steel facings for building purposes, by which colorsteel double-sided wall panels and roof panels or panels of colorsteel on one side and flexible facing on the other side can also be produced. |
|
|
|
| ，
Continuous Production Line of Foil-Sided PU Sandwich Panels
|
This production line is mainly applied to manufacture polyurethane-or phenol-laminated sandwich panel with aluminum foil facings used for making central air-conditioning ducts, which can also manufacture the panels with flexible facings such as brown paper, aluminum foil reinforced paper, etc. |
|
|
|
| ，
Continuous Production Line of PU-Cored Garage Door Panels
|
This production line is used to produce sandwich panels for making automatic doors with the middle layer of rigid polyurethane foam and with aluminum sheet or colorsteel sheet as the top and bottom face layers. The laminated panel is between 30 and 100 mm in thickness, 350~700mm in width, length determined by the customer. |
|
|
|
| ，
Low-pressure reaction injection machine of two components
|
This machine can make highly-elastic, slowly-elastic, self-skinning, half-rigid, or rigid PU foam products such as seat cushions for vehicle use, pillows, toys, chair arms, steering wheels, dashboards, mirror frames, flower pots, insulating material, soles, burglaryproof doors, or fillings of elevator¨s door. |
|
|
|
| ，
Low-pressure reaction injection machine of large flow-rate
|
It is used for making large PU products such as highly-elastic foam mattress, cubic thermoplastic foam ceilings for vehicle use, etc. |
|
|
|
| ，
Continuous production line for end caps of PU filter series
|
Continuous production line for PU filter end caps is a kind of specialized equipment used to produce rigid and half-rigid PU filter end caps. Its operation principle is as follows: Raw materials are injected into moulds automatically running along a preset locus after being agitated in the low-pressure reaction injection machine. Then after inserting a element,the injected mould will be transferred onto the streamline with mating fixtures, waiting for ripening and hardening into shape. |
|
|
| Pages >> |
1 |
2 |
3 |
4 |
6 Products/Page All 4 Pages |
|
|
|
